MAGEWELL | USB Capture Plus Family | USB Capture DVI Plus

USB Capture DVI Plus
One channel HD capture device
Part number: 32080


• Captures one of the following:
   DVI + audio
   VGA + audio
   Component + audio
   HDMI + embedded audio
• Audio input via Line in
• Extract HDMI embedded audio output via Line out

 

 

Capture 2k x 2k Compatible with Windows Compatible with Linux
Compatible with Mac OS X
Plug and Play
Support UVC Protocol Up/down Scaling Deinterlacing Image Control
Various Output Color Spaces
Firmware Upgrade Compatibility with Software Continuously Work for 24hx7 Multiple Devices on One Host
Supported OS
  • Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64)
  • Linux (Ubuntu 12.04–16.10, CentOS 7)
  • OS X 10.9–10.11
  • macOS 10.12
  • Chrome OS
Supported APIs
  • Windows
    • DirectShow
    • Wave API/DirectSound/WASAPI
  • Linux
    • V4L2
    • ALSA
  • OS X/macOS
    • QuickTime
    • AV Foundation
Supported Software
  • VLC
  • VirtualDub
  • OBS
  • XSplit
  • vMix
  • VidBlaster
  • Wirecast
  • Microsoft Media Encoder
  • Adobe Flash Media Encoder
  • Any other DirectShow, V4L2, QuickTime,AV Foundation based encoding or streaming software
Input Interfaces
  • DVI-I
    • DVI 1.0
    • HDMI 1.4a (via breakout cable)
    • VGA (via DVI-to-VGA convertor)
    • Component (via breakout cable)
  • 3.5mm audio jack
    • unbalanced Line In interface
Host Interfaces
  • USB 3.0
    • compatible with USB 2.0
    • compatible with USB 3.1 Gen 1
Output Interfaces
  • 3.5mm audio jack
    • unbalanced Line Out interface
Input Features
  • Auto scan of video input sources when there is no signal input to the currently selected input source
  • Manual selection of video input source
  • Auto selection of linked (embedded) audio input source when the video input source changes
  • Manual selection of audio input source
  • Support for input video resolutions up to 2048×2160
VGA& Component Specific Features
  • 12-bitADC
  • Support for RGB & YCbCr (YUV) color formats
  • Support for ‘Seperated sync’, ‘Composite sync’, ‘Sync-on-green’ (SOG), ‘Sync-on-luminance’ (SOY)
  • Support for DMT, CEA, CVT, GTF video timings
  • Input signals up to 165MHz pixel rate are digitized with 1:1 sampling
  • Input signals over 165MHz pixel rate can be digitized with horizontal sub-sampling (resulting in some image quality loss – NOT recommended)
  • Auto detection of RGB & YCbCr color formats
  • Auto or manual sampling phase adjustment
  • Auto horizontal alignment
  • Support for customized video timings
  • Support for customized video resolutions for CVT/GTF timings
HDMI Specific Features
  • 225MHz HDMIreceiver
  • Adaptive HDMI equalizer support for cables lengths up to 30M
  • Support for customized EDID
  • Support for extraction ofAVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
  • Full colorimetry support
  • Support for 8/10/12-bit color depths
  • Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
  • Support for up to 2-channel IEC60958 audio streams
  • Support for extraction of audio formation information & channel status data
  • Support for extraction of video timing information
  • Support for extraction of 3D format information
  • Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.
Analog Audio Features
  • Extraction of stereo embedded HDMI audio for recording and output via 3.5mm stereo mini-jack Line Out
  • Capture of stereo analog audio from Line In (3.5 mm stereo mini-jack socket)
Video Capture format
  • Support for capture resolutions up to 2048×2160
  • Support for capture frame rates up to 120fps (Actual capture frame rate can be limited by the USB bandwidth and internal working frequency. Typical capture frame rates on the Intel USB 3.0 controller are as follows.)
    • 1920×1080 YUY2 (up to 75fps)
    • 1920×1080 RGB24 (up to 60fps)
  • Support for YUY2 & UYVY4:2:2 8-bit
  • Support for RGB24 & RGB32 4:4:4 8-bit
  • The default capture format is YUY2. More capture format can be set using USB Capture Utility.
Video Processing Features
  • Video processing pipelines with 160 Mpixels/s processing bandwidth
  • Video cropping
  • Video scaling
  • Video de-interlacing
    • Weave
    • Blend top & bottom field
    • Top field only
    • Bottom field only
  • Video aspect ratio conversion
    • Auto or manual selection of input aspect ratio
    • Auto or manual selection of capture aspect ratio
    • Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
  • Video color format conversion
    • Auto or manual selection of input color format & quantization range
    • Auto or manual selection of capture color format, quantization range & saturation range
    • Support for RGB, YCbCr 601, YCbCr 709 color formats
    • Support for Limited or Full quantization range
    • Support for Limited, Full & ‘Extended gamut’ saturation range
  • Video frame rate conversion
  • Vertical flip and mirror
Multiple devices on one computer
  • Support for connecting multiple USB devices to one system
  • Support for setting the device serial number as the device name shown in the system using USB Capture Utility
SDK
  • The USB Capture SDK provide functions including signal status extraction, capture configuration, etc.
Firmware Upgrade
  • Multiple devices in one system can be upgraded simultaneously
LED Indicator
  • Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed.
Form Factor
  • 101.5mm (L) x 56.8mm (W) x 17mm (H)
Accessories
  • USB 3.0 cable
  • DVI to VGA connector
  • DVI-I to HDMI + Component breakout
  • DB9 to YC + Composite + Analog Audio + Componentbreakout
Power Consumption
  • 5V max current: 600mA
  • max power consumption:~3W
Working Environment
  • Operating temperature: 0 to 50 deg C
  • Storage temperature: –20 to 70 deg C
  • Relative Humidity: 5% to 90% non-condensing

The latest Documentation and Software can be found at the Homepage of Magewell

Limited Warranty for:

  • Gen 1 Family: 1 year
  • Pro Capture/Eco Capture/USB Capture Family: 2 years
  • USB Capture Plus Family: 3 years
  • Ultra Stream Family: 2 years
  • I/O Family: 3 years
  • Mini Repeater: 1 year
  • The breakout cables or adapters provided as accessories: 1 year

Any low profile bracket provided as an accessory is not included in the free limited warranty.

Documentation

  • Technical Specification

Software

  • USB Capture Utility V3

Package content

DVI2VGA connector USB 3.0 Cable*
DVI-I to HDMI + Component breakout

* Please use the included Magewell USB 3.0 cable, which is a custom accessory. Using any other similar cables might cause capture problems and even damage the capture device.


Warning: mkdir(): Permission denied in /var/www/html/wp-content/plugins/nextend-accordion-menu/nextend/filesystem/filesystem.php on line 99
Couldn't create the required cache dir: /var/www/html/wp-content/cache/less/static/ Please make sure that the folder writeable by PHP!134