Avenview | Video Wall | HDM2-PROWALL-T4K

4 Displays 4K Videowall Processor with Audio Support and Rotation

The HDM2-PROWALL-T4K 4 screen HDMI UHD 4K@60 4:4:4 video wall processor is the first videowall processor to input a TRUE 4K@60 source and output onto a 4 HD Screens. Processing the signal pixel to pixel with a vivid, clear and crisp picture without resolution loss. This unit can be used as a dedicated 2x2 videowall at UHD 4K@60 or 1080p with rotation, different preset or custom layouts. Bonus feature this unit can support cascading through software to allow using multiple units to create a larger videowall 3x3 with stunning clarity using the same UHD 4K@60 input for displaying content on your flat panel displays or projectors. Bundled with its own control software the user can simply configure different layouts for any solution such as 1x1, 1x3, 1x4, 2x2 and mosiac. The HDM2-PROWALL-T4K can accept both DVI/HDMI source inputs/outputs, made with the embedded scaler that converts signals from either DVI/HDMI source to match the native resolution of monitors, flat panel displays, projectors connected to the 4 outputs connectors. Each output resolution can be selected fpr each display, also settings up to FULL HD 1080p and PC resolutions WUXGA (1920x1200). Recommended applications include retail digital signage, commercial applications and broadcasting/education/surveillance systems etc.

  • Four DVI/HDMI outputs from 640x480 to 1920x1080, 1920x1200
  • Supports HDMI/DVI input, from 640x480 to 1920x1080@60,UHD 4K@60 4:4:4, interlaced or progressive
  • HDCP compliant (HDCP 2.2 input/HDCP 1.4 output
  • Several image parameters and layouts can be saved in computers and can be loaded for later use
  • Firmware upgradable for new features and technology enhancements
  • Supports IR remote control
  • Supports input rotation at 1080p resolution only
  • Software control through USB and Ethernet
  • Resize, position, zoom output video
  • User-selectable output settings, up to 1920x1080,1920x1200
  • Supports UHD 4K@60 input with layout only in 2x2 mode
  • Supports Cascading through software multiple units 3x3 mode
  • Each DVI/HDMI output has an independent controllable display area
  • Supports remote control to switch 1x1, 2x2, 1x3 rotate, and 1x4 rotate mode
  • Each output can support OSD control for edge correction
  • Compact size
ITEM DESCRIPTION
MODEL HDM2-PROWALL-T4K
MODEL DESCRIPTION 4 Screen 4K Display Video Wall Processor
HDCP COMPLIANCE Yes
VIDEO BANDWIDTH Input – Single link 600MHz [18Gbps]
Output – DVI [Single-link 4.95Gbps] / HDMI[2.25G to 6.75Gbps]
VIDEO SUPPORT Input - 4K2K@60 (4:2:0 10bits) / 4K2K@60 (4:4:4 8bits)
Output – 1920x1080@60 / 1920x1200@60
VIDEO FORMAT SUPPORT HDMI/DVI
VIDEO LOOP-OUT No
AUDIO SUPPORT Yes only when using HDMI source device
ESD PROTECTION Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge]
PCB STACK-UP 8-layer board [impedance control — differential 100Ω; single 50Ω]
INPUT 1x HDMI/DVI-D + 1x USB + 1xRJ45
OUTPUT 4x HDMI/DVI-D + 1x L/R RCA Stereo
CONTROL IR remote control / Ethernet / USB (virtual com) / Front Panel
INPUT TMDS SIGNAL 1.2 Volts [peak-to-peak]
DVI CONNECTOR DVI-D [29-pin female, digital only]
USB CONNECTOR Type A
RJ 45 COPNNECTOR WE/SS 8P8C
DIMENSIONS 11.3" x 7" x 1.7" (287,0 mm x 177,8 mm x 25,4 mm)
POWER SUPPLY 12V 5A
WEIGHT 3.3lbs (~1,5 kg)
ENVIRONMENTAL
OPERATING TEMPERATURE 32° ~ 104°F (0° to 40°C)
STORAGE TEMPERATURE -4° ~ 140°F (-20° ~ 60°C)
RELATIVE HUMIDITY 20~90% RH (no condensation)

The latest Documentation and Software can be found at the Homepage of Avenview

Documentation

  • Avenview Modular Matrix Switch User GuideAvenview HDM2-PROWALL-T4K User Guide
  • Avenview Modular Matrix Switch Data SheetAvenview HDM2-PROWALL-T4K Data Sheet

Software

  • Avenview Modular Matrix Switch User GuideAvenview HDM2-PROWALL-T4K PC Software

Additional Information

  • Model: HDM2-PROWALL-T4K

Diagram


Warning: mkdir(): Permission denied in /var/www/html/wp-content/plugins/nextend-accordion-menu/nextend/filesystem/filesystem.php on line 99
Couldn't create the required cache dir: /var/www/html/wp-content/cache/less/static/ Please make sure that the folder writeable by PHP!134