MAGEWELL | USB Capture Plus Family | USB Capture HDMI Plus

USB Capture HDMI Plus
Ein Kanal 2K Erfassungsgerät
Produktnummer: 32040


• Erfasst HDMI + eingebettetes Audio
• Durchschleifendes HDMI-Signal
• Audio-Eingang über Mikrofon
• Extrahieren Sie die eingebettete HDMI-Audioausgabe über Kopfhörer
• Eingang unterstützt 4Kp60 4:2:0. Aufnahmen von den neuesten Spielekonsolen wie PS4 Pro und XBOX One S. Automatisches skalieren auf 2K für Aufnahmen oder Streaming.

 

Erfasst 2k x 2k Kompatibel mit Windows Kompatibel mit Linux
Kompatibel mit Mac OS X
Plug and Play
Unterstützen UVC-Protokoll Skalierung auf/ab Deinterlacing Bildsteuerung
Verschiedene Ausgabefarbräume
Firmware Aktualisierung
Kompatibilität mit Software Für 24 h x 7 Betrieb Mehrere Geräte auf einem Host
Supported OS
  • Windows 7/8/8.1/10/2008/2008 R2/2012 (x86 & x64)
  • Linux (Ubuntu 12.04–16.10, CentOS 7)
  • OS X 10.9–10.11
  • macOS 10.12
  • Chrome OS
Supported APIs
  • Windows
    • DirectShow
    • Wave API/DirectSound/WASAPI
  • Linux
    • V4L2
    • ALSA
  • OS X/macOS
    • QuickTime
    • AV Foundation
Supported Software
  • VLC
  • VirtualDub
  • OBS
  • XSplit
  • vMix
  • VidBlaster
  • Wirecast
  • Microsoft Media Encoder
  • Adobe Flash Media Encoder
  • Any other DirectShow, V4L2, QuickTime,AV Foundation based encoding or streaming software
Input Interfaces
  • HDMI
    • DVI-D 1.0
    • HDMI 1.4
  • 3.5mm audio jack
    • Microphone interface
Host Interfaces
  • USB 3.0
    • compatible with USB 2.0
    • compatible with USB 3.1 Gen 1
Output Interface
  • 3.5mm audio jack
    • headphones interface
Loop-through Interface
  • HDMI
    • HDMI loop-through interface
Input Features
  • Support for input video resolutions up to 4096×2160
HDMI Specific Features
  • 297MHz HDMIreceiver
  • Adaptive HDMI equalizer support for cables lengths up to 30M
  • Support for customized EDID
  • Support for extraction ofAVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
  • Full colorimetry support
  • Support for up to 4096×2160 4:4:4/4:2:2 30fps or 4096×2160 4:2:0 60fps input signals
  • For 4:2:0 input signals, the horizontal and vertical resolution will be reduced to 1/2 for capturing
  • For 4:4:4/4:2:2 input signal at more than 170MHz, the horizontal resolution will be reduced to 1/2 for capturing
  • Support for 2 channel ISC60958 audio streams
  • Support for extraction of audio formation information & channel status data
  • Support for extraction of video timing information
  • Support for extraction of 3D format information
  • Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode.
Analog Audio Features
  • Extraction of stereo embedded HDMI audio for recording and output via 3.5mm stereo mini-jack Line Out
  • Capture of analog audio via 3.5 mm microphone interface
  • Integrate the functions of a USB audio card. Playback audio via 3.5 mm headphones interface. Support for recording the playback audio of the computer.
Video Capture format
  • Support for capture resolutions up to 2048×2160
  • Support for capture frame rates up to 120fps (Actual capture frame rate can be limited by the USB bandwidth and internal working frequency. Typical capture frame rates on the Intel USB 3.0 controller are as follows.)
    • 1920×1080 YUY2 (up to 70fps)
    • 1920×1080 RGB24 (up to 60fps)
  • Support for YUY2 & UYVY4:2:2 8-bit
  • Support for RGB24 & RGB32 4:4:4 8-bit
  • The default capture format is YUY2. More capture format can be set using USB Capture Utility.
Video Processing Features
  • Video processing pipelines with 160 Mpixels/s processing bandwidth
  • Video cropping
  • Video scaling
  • Video de-interlacing
    • Weave
    • Blend top & bottom field
    • Top field only
    • Bottom field only
  • Video aspect ratio conversion
    • Auto or manual selection of input aspect ratio
    • Auto or manual selection of capture aspect ratio
    • Three aspect ratio conversion modes: Ignore (Anamorphic), Cropping or Padding (Letterbox or Pillarbox)
  • Video color format conversion
    • Auto or manual selection of input color format & quantization range
    • Auto or manual selection of capture color format, quantization range & saturation range
    • Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
    • Support for Limited or Full quantization range
    • Support for Limited, Full & ‘Extended gamut’ saturation range
  • Video frame rate conversion
  • Vertical flip and mirror
Multiple devices on one computer
  • Support for connecting multiple USB devices to one system
  • Support for setting the device serial number as the device name shown in the system using USB Capture Utility
SDK
  • The USB Capture SDK provide functions including signal status extraction, capture configuration, etc.
Firmware Upgrade
  • Multiple devices in one system can be upgraded simultaneously
LED Indicator
  • Status LEDs indicate the working state of each channel: idle, input signal locked, memory failed or FPGA configuration failed.
Form Factor
  • 98.1mm (L) x 56.8mm (W) x 17mm (H)
Power Consumption
  • 5V max current: 900mA
  • max power consumption:~4.5W
Working Environment
  • Operating temperature: 0 to 50 deg C
  • Storage temperature: –20 to 70 deg C
  • Relative Humidity: 5% to 90% non-condensing

Die aktuellsten Dokumentationen und Software finden sie auf der Homepage von Magewell

Eingeschränkte Garantie für:

  • Gen 1 Familie: 1 Jahr
  • Pro Capture/Eco Capture/USB Capture Familie: 2 Jahre
  • USB Capture Plus Familie: 3 Jahre
  • Ultra Stream Familie: 2 Jahre
  • I/O Familie: 3 Jahre
  • Mini Repeater: 1 Jahr
  • Die als Zubehör mitgelieferten Kabel oder Adapter: 1 Jahr

Die als Zubehör angebotene Low-Profile-Halterung ist nicht in der kostenlosen, eingeschränkten Garantie enthalten.

Dokumentationen

  • Technical Specification

Software

  • USB Capture Utility V3

im Lieferumfang

USB 3.0 Cable*

* Bitte verwenden Sie das mitgelieferte Magewell USB 3.0-Kabel. Die Verwendung anderer Kabel kann zu Aufnahmeproblemen führen und sogar das Erfassungsgerät beschädigen.


Warning: mkdir(): Permission denied in /var/www/html/wp-content/plugins/nextend-accordion-menu/nextend/filesystem/filesystem.php on line 99
Couldn't create the required cache dir: /var/www/html/wp-content/cache/less/static/ Please make sure that the folder writeable by PHP!134